D&R ELECTRONICS CO. LTD.

PDU-2SS

Description:

Power Distribution Units (PDUs) provide a direct, easily traceable route to the input power source avoiding interfering with the vehicles factory wiring harnesses. Allowing for Programmable Low Battery Voltage Shutdown, Programmable Timed Shutdown, and Zero current consumption in Sleep Mode. PDU-2SS is a single point power distribution system with with output 1 at a maximum load capacity of 40 Amps and output 2 with maximum load capacity of 20 Amps.

Gallery

PDU-2SS

Power Distribution Unit - 2SS

Available in 12V (PDU-2SS-12) or 24V (PDU-2SS-24) options
Built with all solid state components for reliability
Outputs are divided into two groups
Each group is individually programmed for time shutdown, after ignition is turned off
Four position dip switch allows the end user to set up the threshold time for each individual group
Voltage monitoring sensor to protect the battery
Vehicle battery voltage monitoring
Low Battery Voltage Shutdown prevents a dead battery, Factory default parameter is set at 11.5V DC (10 Second Delay) or can be factory Set (between 10 V DC to 13 V DC) based on Clients requirements.
High Voltage Disconnect at approximately 18V (10 Second Delay)

Height	0.7 inch
Length	4.4 inches
Maximum Current Load	40A at output 1, 20A at output 2
Programmable Low Battery Voltage Shutdown	Factory default parameter is set at 11.5V DC (10 Second Delay) or can be factory Set (between 10 V DC to 13 V DC) based on Clients requirements
Standby Current	25mA
Voltage Range	12-24 VDC
Width	2.5 inches
Sleep Mode	0mA
High Voltage Disconnect	18V (10 Second Delay)

Site Map

PDU-2SS

Description:

Gallery

PDU-2SS

Power Distribution Unit - 2SS

Subscribe to our newsletter

Find a Dealer

PDU-2SS

Description:

Gallery

PDU-2SS

Power Distribution Unit - 2SS

Related Products:

PDU14-K

PDU42WB

PDU-8S

PDU-16SS

PDU-6SS

PDU-31SS

PDU-13SS

PDU-27SS

Subscribe to our newsletter

Find a Dealer

Login

Create Account

Forgot Password